Blackmagic Design ATEM Studio Converter 2 Standards HD Format Support SDI 1080p 60/59.94/50/30/29.97/25/24/23.98 1080PsF 30/29.97/25/24/223.98 1080i 60/59.94/50/ 720p 60/59.94/50 SD Format Support NTSC: 525i 59.94 PAL: 625i 50 Video SDI Video Input 4 x 10 bit SD/HD switchable camera inputs 1 x 10 bit SD/HD switchable program input from switcher, including Tally information embedded in the SDI signal SDI Compliance SMPTE 259M, SMPTE 292M Video Sampling 4:2:2 Color Precision 10-bit Color Space REC 601 REC 709 Optical Fiber Video Input 4 x single mode SD/HD switchable camera inputs with LC connector Optical Fiber Input 4 x single mode LC connectors for video with embedded audio Channels 1 & 2 are camera audio Channels 15 & 16 are talkback audio Output 4 x single mode LC connectors for video with embedded audio Channels 1 & 2 are camera audio Channels 15 & 16 are talkback audio Audio Audio Sampling 48 KHz 24-bit A/D conversion Analog Audio Output 4 x 3-Pin XLR Balanced Audio Pairs (1 x pair per fiber input) 2 x RCA jacks provide a L/R stereo pair Talkback 1 x 1/4" TRS headphone jack 1 x .206" TRS mic input for use with aviation style headset 1 x 3-pin XLR connector for talkback microphone 1 x integrated speaker Talkback Control 8 x Front panel buttons for camera operator selection, lock, mute and un-mute AES/EBU Talkback Loops Input 1 x BNC mic input 1 x BNC headphone input Output 1 x BNC mic output 1 x BNC headphone output General OS Compatibility Mac OS X 10.7 Lion and later OS X 10.8 Mountain Lion and later Windows Windows 7 Windows 8 Computer Interface 1 x mini-B type USB 2.0 connector for initial setup, firmware updates and Converter Utility software control Temperature Operating 32 to 104°F (0 to 40°C) Storage -4 to 113°F (-20 to 45°C) Power Requirements 110 - 220V AC, 50/60 Hz 12 - 31 V DC redundant input Note: IEC powercord is required/not included, redundant power supply not included Dimensions (H x W) 1.7 x 18.9" (44 x 482 mm) 1RU size with built-in rack mount ears Weight 4 lb (1.81 kg)
