Thiết bị đo đa năng Kyoritsu 6015 - Model 6015 - Hiển Thị Số - Đothông mạch, đo mạch vòng, đo điện trở đất... - Phạm vi đo:20/200/2000Ω Continuity Testing Measuring Ranges 20/200/2000Ω Autoranging Open Circuit Voltage >6V Short Circuit Current >200mA DC Accuracy | ±(1.5%rdg+3dgt) Loop Impedance Testing Rated Voltage 230V AC ±10% [50Hz] Voltage Measuring Range 100~400V AC [50Hz] Impedance Ranges 20/200/2000Ω Nominal Test Current 25A (20Ω range) 1.2A (200Ω range) 1.2A (2000Ω range) Test Period 1/2 cycle (10ms) Base Accuracy 20Ω range | ±(2%rdg+2dgt) D-LOK OFF | ±(5%rdg+5dgt) D-LOK ON RCD Testing Rated Voltage 230V AC ±10% [50Hz] Trip Current Settings RCD × 1/2 : 10,30,100,300,500,1000mA RCD × 1 : 10,30,100,300,500,1000mA RCD × 5 : 10,30,100mA Trip Current Duration RCD × 1/2 × 1: 2000ms RCD × 5: 200ms fast trip 50ms Accuracy Trip current +10%-0% of test current at 230V Trip time±(2%rdg + 3dgt) Insulation Testing Measuring Ranges 20/200/2000MΩ Autoranging Test Voltage 250V, 500Vand 1000V DC Output Voltage on Open Circuit 250V+20%-0% 500V+20%-0% 1000V+20%-0% Rated Current >1mA Accuracy 0~100MΩ| ±(2%rdg+3dgt) 100MΩ~2000MΩ| ±(5%rdg+4dgt) PSC Testing Rated Voltage 230V AC ±10% [50Hz] PSC Ranges 2000A and 20kA Accuracy PSC accuracy derived from measured loop impedance specification and measured voltage specification Fault Current Rated Voltage 230V AC ±10% [50Hz] Fault Current Ranges 2000A and 20kA Nominal Test Current 1.2A (2000A) 25A (20kA) Accuracy Fault Current accuracy derived from measured loop impedance specification and measured voltage specification Earth Resistance Ranges 20Ω/200Ω/2000Ω Output Voltage 50V peak to peak square wave Frequency 720Hz ±5% Accuracy 20Ω| ±(2%rdg+5dgt) 200/2000Ω| ±(2%rdg+3dgt) General Safety Standard IEC 61010-1 CAT.III 300V Pollution Degree 2 Withstand Voltage 3700V AC for 1 minute Power Source 8 × 1.5V R6 or LR6 Dimensions 105(L) × 210(W) × 240(D)mm Weight 1924g approx. Accessories 7098 (Distribution board test leads for Loop/PSC/RCD testing ) 7099 (Moulded plug test leads(1 set) for Loop and RCD testing at sockets(EU plug) )* 7025 (Lead for insulation and continuity testing) 7109 (Earth resistance test leads (1 set)) KSLP5 (external earth probe) 8032 (auxiliary earth spikes) 8210 (IrDA Adaptor) Durable Holdall Accessory pouch Battery 8 × 1.5V R6 or LR6 Instruction Manual